Faq warning saying the evriio.p file was p coded from an old Matlab version
Issue:
I get a warning saying the evriio.p file was p-coded from an old MATLAB version.
Possible Solutions:
If you receive the warning (or a similar warning) :
Warning: The P-code file evriio.p was generated prior to MATLAB version 7.5 (R2007b) and will not be supported in a future release. Use pcode to regenerate evriio.p using MATLAB R2007b or later.
There are two solutions to this problem. The one to use depends on whether you have a full (non-expiring) license or a demo (expiring) license:
Full License
With a full PLS_Toolbox license, use the following steps to solve the problem.
- Run
evriinstall
and follow the instructions to install PLS_Toolbox. After it is complete, restart Matlab and see if the warning messages are gone. If so, the problem is solved and you can ignore the remaining steps
- Exit Matlab
- Locate the PLS_Toolbox/utilities folder using your system's file browser (Explorer, Browser, etc)
- Locate and rename the "evriio.p" file as "evriio_old.p" (Window 7 Users see note below)
- Locate and rename the "evriio_2010b.p" file as "evriio.p"
- Restart Matlab
The message should be gone after completing those steps. If not, contact our helpdesk at helpdesk@eigenvector.com .
NOTE: Window 7 users may find that they do not have sufficient permission to make these changes if PLS_Toolbox has been installed in a folder located under the "C:\Program Files folder" (as it would by default.) In these cases, the only solution may be to re-install PLS_Toolbox into a different folder such as one located in your personal Documents folder. Follow the directions for installing PLS_Toolbox located here but specify an alternative folder for installation.
Demo License
If you receive a similar message when using a demo license of PLS_Toolbox, the problem is that you have downloaded the wrong version of PLS_Toolbox. There are two "builds" of the software available from the "Download" tab of your account at http://download.eigenvector.com. The "Standard build" is designed for use on MATLAB versions 2007b and later. The "2007a build" is for MATLAB versions 2007a or earlier.
- Log into your account
- Choose to download PLS_Toolbox
- On the page asking for which version of the installer you want, choose the version for use with 2007b and later
Still having problems? Please contact our helpdesk at helpdesk@eigenvector.com